Thursday, June 28, 2012

chirp, chirp, cheap, cheap, cricut

any cricut lovers out there? this one's for you!

i happen to love my cricut, but i did fight getting one for a long time. my mom bought a small one and when she decided she wanted a big one, she offered me hers, i declined. about a year later, my mother-in-law did the same thing. this time, i said sure. even after i got it, i still wasn't convinced i'd use it that much. i've always loved crafting and making things, but i kind of felt like it was cheating. silly, i know. i started out thinking i'd just use it for scrapbooking, but i love it so much, i've started making cards as well. heck, i even made art for the wall in our old bathroom to match our shower curtain. woodland creatures, of course :)

that being said, there are two things you should know about me: 1. i don't like waste and 2. i don't love spending money. so, two of the things i really like about the cricut are that i can always get my paper either on sale or with a coupon and that i can start anywhere on any scrap of paper, i don't have to use a new sheet every time. one of the things i wasn't too happy about was that once a cutting mat ran out of sticky, i'd have to buy a new one. that meant, i had to spend money and i had to throw away unrecyclable plastic. double boo! but, not any more. here's a step by step on how to wash and re-stickify your mats. it's easy, really. and you probably have some of the items already.

1. start with an old used mat

2. wash it off, but how? at first i tried regular old soap and water with a plastic scrubber. that was taking too long and wasn't getting off all of the old sticky stuff. i tried a corner with nail polish remover and found out that was a bad idea because it not only took off the sticky, it took off all the guides as well, oops. 

 nail polish remover, bad.


i looked online and saw that you can use brake cleaner, but i thought, "hey, i have WD-40, let's give that a whirl." what do you know? it worked! 


after i sprayed the WD-40 and let it sit for a few minutes, i started scraping it with a pallet knife. it came right off. see that line of yellowy, lumpy stuff? that's the sticky coming off. i started at the bottom and worked my way up. once i got it all off, i washed the mat with soap and water to get the residual WD-40 off and hung it out in the sun to dry. (i wouldn't suggest drying it with a towel, it will get fibers on it)

3. i masked off the edges with painter's tape so that when it runs through the machine it's not sticky under the wheels.


4. and lastly, i sprayed it with a low-tack spray adhesive. this particular brand is easy-tack by krylon. wait a few minutes, pull off the painter's tape and voila! good as new. now my conscience and my wallet are happy.


happy crafting!

6 comments:

  1. You are a genius! Looking forward to seeing your creations on your "new" mat.

    ReplyDelete
  2. thank you so much, ill try it, Thank you

    ReplyDelete
  3. Thank you for this tutorial! I just restuck my mat and it turned out great! Thanks again!

    ReplyDelete
  4. Replies
    1. Just curious, was it sticky any after you cleaned it with soap and water? Before you reapplied sticky

      Delete
    2. I don't believe it was (if memory serves) If it had been, I would have stopped there instead of completely scraping it off. :)

      Delete